Ball Swaging
(E.g. plugging a hole in an automotive anti-lock breaking systems)

The Electro Press can precisely insert a metal bearing into a workipiece (e.g. in a hydraulic circuit, acting as a plug) by controlling the travel distance, and load applied to the stopper.
The actual load and position data can also be output to a PC for quality assurance.

The acceptable quality range can be set to the following items.

d1: Position where pressure was first detected
d1-d2: Pressing distance
dA-dB: Load judgment start and end positions
PA-PB: Load judging range (PA: lower load limit, PB: upper load limit)

Guide Roller Assembly

Select the "set stop position" mode to maintain the distance (L) between the two flanges, which allows the guide roller to rotate smoothly. Then, set the "sensor load-at end" to control the press-in force. The functional quality (roller rotation and flange fixation) of the guide roller can thus be ensured. 

Securing Adhesive

The Electro Press can apply a constant pressure for a user-defined time to ensure that the materials are bonded with proper strength. This may also be used in conjunction with ultrasonic adhesion.

Clamping Motor in Aluminum Housing

The edge of an aluminum housing can be bent inward to secure a motor. Pressure can precisely be controlled to prevent damage or strain to the motor.