本機器采用鋼板焊接結構,機身采用有限元分析設計、振動時效消除內應力，使機身穩定、可靠。

◎采用三點支撐滾動導輪，消除支撐間隙，提高剪切精度。

◎刀架剪切角能在一定的范圍內調整，可使剪切材料變形量減小到理想狀態，又可剪切超厚板料。

◎剪切行程任意調整，提高了工作效率，又可實現分段剪切功能。

◎后擋料設計了手動抬升功能，便于超長板料剪切。

◎墻板內側設有手動加油泵，操作方便，保證關鍵部位的潤滑。

◎插裝式液壓系統，減緩油溫提升，增強機床運行的可靠性和安全性。

◎標配采用MD-100專用系統及PLC控制器，剪切計數、后擋料、剪切角及刀口間隙的調節直觀、簡單、方便。

◎可選用DAC310、DAC360數控系統以滿足更高精度要求的剪切和控制。

On basis of WF67Y series press brake, this type machine is installed CNC controllers, which can meet customers’requirements for the design of high precision processing.

◎Using three-point rolling guide pulley can eliminate the support gap, and increase cutting precision.

◎Shearing angle can be adjusted within a certain range, which can reduce the shearing deformation of sheet metal and can shear much thicker sheet metal.

◎The shearing stroke can be adjusted at will, which raise the working efficiency and realize the function of partition cutting.

◎The backgauge is designed manual lifting function, which is convenient to shear long sheet metal.

◎Inside the wallboard manual petrol pump is installed, which makes operating convenient and lubricating reliable.

◎Plug in hydraulic system can make oil temperature become high slowly, meanwhile it enhance the reliability and safety operation of machine.

◎Standard machine is installed MD-100 controller and PLC. Slipper stroke adjusted by motor, shearing times can be shown easily.

◎DAC310 and DAC360 CNC controllers both are available upon request.