50平開窗系列casement window 50 series

清晰明亮的外觀，優異的結構設計，別致細膩。

Clear,brigh external appearance, excellent structural structural design, unique and refined.

配置5+6A+5和5+9A+5雙面鋼化中空玻璃，隔音、安全性能更佳。中空位置可搭配格條裝飾，令整體效果脫離單調單一，樣式多變。

It is provided with 5+6A+5 and 5+9A+5double side hollow toughened glass with better sound insulation and security. The bollow position can be collocated with grid ornament to make the whole effect free of monotony and with multiple designs.

歐洲標準槽口設計，內扇料采用整合式設計，將壓條和窗扇融為一體，內設傳導條和執手傳動構件，外設離合式執手，據需要可設置多點鎖，合頁式傳動軸，開啟角度0-90，點式風撐定位，抗風性能好。

With european standard slot design,the internal leaf adopts integral design to make the trim strip be integrated with window leaf,it is provided with conducting strip and handle drive element inside and clutch type handle outside.multiple point lock can be set where necessary,the hinge type drive shaft can open between 0-90 degrees. The point type air support positioning has strong wind resistance.

外框和內扇之間采用等壓、減壓原理，內設硅膠或三元乙丙（DPEM）密封膠條，其隔音，隔熱、防水、氣密性能更佳。

Equal pressured and reduced pressure principle is used between outer frame and inner leaf, it is embedded with silica gel or ethylene propylene diene rubber sealing rubber bar for optimal performance in sound insulation,heat insulation, water proofing and air fightness.

Foiding door

折疊式設計，令開啟空間達到最大的限度，可以充分看到外部景觀，使室內外暢通無阻，視野寬闊。

The folding design makes the opening space achieve maximum limit, which will allow you to see all the external sights and ensure the intermal space with clear and wide visual field.

降低熱量傳導：采用隔熱斷橋鋁合金型材，其熱傳導系數為1.8~3.5w/㎡.k,大大低于普通鋁合金