中性快速固化硅酮密封膠，適用于一般密封及粘結如門窗、金屬屋頂、排水溝、對玻璃、鋁、不銹鋼、磚、陶瓷及大部分金屬及塑料均有極強粘結力。
主要性能特點:
1.單組分，易于操作
2.中性固化，無強烈的氣味
3.快速固化
4.維持很好的柔韌性
5.與玻璃，大部分金屬和塑料有極強粘結力
6.七種顏色可供選擇：透明，白色，灰色，淺灰色，黑色，銀色，棕色
包裝：300ml硬支裝，24支一箱

未固化的特性      
外觀                                  膏狀
邵氏硬度°A                     18                  ASTM C661
下垂度（W=20mm）         0                  JIS A1439
操作時間                        10分鐘   
不粘手時間                     20分鐘                JIS A1439
固化時間                         2天           8mm深@23℃，55%相對溫度
已固化的特性   
外觀                              彈性橡膠狀      
擠用性                          ＞300ml/min     
最大抗拉強度              ＞1.2Mpa               ASTM D412
最大拉伸率                  350%                 ASTM D412
固化后使用溫度        -53~149℃              ADCT-13A
彈性回復率                   ＞90%      
接口位移承受能力       ±25%                ASTM C719 
很適合用于出口，主要是因為污染指標測試

Brand: GE
Model: 168 neutral silicone sealant
  
Basic parameters
Uses: water, cracking, weathering
Size: 300ml hard sticks, a box of 24
Storage period: 12 months
 
Technical parameters
Elongation: 350%
Surface drying time (hours): 20 minutes
Melting point: 149 ℃
Freezing Point: -53 ℃
Tensile strength: 1.2 mPa
Neutral fast curing silicone sealant for general sealing and bonding, such as windows and doors, metal roof, gutters, glass, aluminum, stainless steel, bricks, ceramics and most metals and plastics are extremely strong bond strength.
Main features:
1. One-part, easy to operate
2. Neutral cure, no strong odor
3. Fast curing
4. To maintain good flexibility
5. And glass, most metals and plastics have strong adhesive force
6. Seven colors: transparent, white, gray, light gray, black, silver, brown
Packaging: 300ml hard sticks, a box of 24

Uncured properties
Appearance paste
Hardness ° A 18 ASTM C661
Ptosis degree (W = 20mm) 0 JIS A1439
Operating time 10 minutes
Sticky time of 20 minutes JIS A1439
Curing time of 2 days 8mm deep @ 23 ℃, 55% relative humidity
Characteristics have been cured
Elastic rubber-like appearance
Crowded with sexual> 300ml/min
The maximum tensile strength> 1.2Mpa ASTM D412
The maximum tensile rate of 350% ASTM D412
After curing temperature -53 ~ 149 ℃ ADCT-13A
Elastic recovery rate of> 90%
Interface displacement capacity of ± 25% ASTM C719
Very suitable for export, mainly because of pollution indicator test