| 熱熔壓敏膠 主要成分:天然橡膠、合成樹脂 質量標準: 外觀:無色透明塊狀彈性固體 固含量:100% 軟化點:90±5℃ 熔融粘度:(170℃)/mpa.s.3600cps 純潔度:加熱至180℃、200目篩網全通過 初粘力:16#鋼球(滾球法) 持粘力:36h 180℃剝離強度∕N∕2.5cm)≥30 施工工藝:1、推薦上膠方式:噴涂或滾涂 2、操作溫度155~165℃ 3、膠箱或膠箱如有積碳,可先用普通石蠟或礦物油清洗再用熱熔膠在135℃左右沖洗 4、本品上膠時的粘度可通過溫度進行調節 5、本品不得與其他牌號熱熔膠混合使用 6、往熱熔膠槽加料后,應立即關閉膠槽蓋子,以防外來雜質污染。 安全事項:1、操作中往熱熔膠槽加料時應佩戴防護眼鏡與防熱手套 2、使用場所應通風良好并嚴禁一切明火 3、在任何時候使用溫度都不能超過200℃ 特點及用途:本品呈無色透明狀,無臭味無毒性氣味,柔軟性能好、粘接力強、老化性能好、耐高溫性能好、對基材適用性廣等特點,適用于汽車地毯復合、車內飾粘接復合、還適用于常見粘扣帶泡綿、塑料、紙、無紡布的粘接復合。 存儲及運輸:儲存于陰涼干燥處避免陽光直射,儲存溫度應底于35℃并遠離火源,保質期1年安排危險品運輸 包裝:本品20Kg紙箱包裝約0.5公斤/塊 Hot-melt pressure-sensitive adhesive Main components: natural rubber, synthetic resin Quality Standards: Appearance: colorless, transparent solid block flexibility Solid content: 100% Softening point: 90 ± 5 ℃ Melt viscosity: (170 ℃) / mpa.s.3600cps Purity: heated to 180 ℃, 200 mesh full by Tack: 16 # ball (ball method) Holding power: 36h 180 ℃ peel strength / N/2.5cm) ≥ 30 Construction process: 1, recommended glue method: spray or roller 2, the operating temperature of 155 ~ 165 ℃ 3, plastic boxes or plastic boxes, if carbon can be normal paraffin or mineral oil with a clean hot melt at around 135 ℃ and then washed 4, when the materials of plastic viscosity can be adjusted by temperature 5, the goods shall not be mixed with other grades of hot melt adhesive 6, after the feeding to the hot melt tank, plastic tank lid should be closed immediately to prevent foreign matter contamination. Safety matters: 1, hot melt tank to the feeding operation should wear safety glasses and heat-resistant gloves 2, using the site should be well ventilated and are prohibited from all fire 3, the temperature at any time should not exceed 200 ℃ Features and uses: This product was colorless and transparent, no smell no toxic smell, soft and good performance, strong adhesion, aging properties, high temperature performance, and wide applicability of the substrate, suitable for car carpet composite , car interior bonding compound, also applies to common Velcro foam, plastic, paper, non-woven adhesive compound. Storage and transportation: Stored in a cool dry place away from direct sunlight, storage temperature should be 35 ℃ and at the end away from the fire, one-year shelf-life arrangement of dangerous goods transport Packing: 20Kg cardboard packaging of this product about 0.5 kg / block | |