GT02型雙組份涂膠機，其關鍵零部件均采用國際知名品牌，優良的品質及可靠性，輔以關鍵機制部件采用高強度優質不銹鋼經熱處理工藝精制而成，使雙組份涂膠機的可靠耐用性大大提高，確保了設備的優良品質。

該涂膠機的基料泵、固化劑泵及比例泵的高壓閥口均采用零泄露特殊合金研磨制造，設有獨特方便的可調式配比機構，輔以兩種組份的比例檢測系統，最大限度地保證雙組份膠近乎苛刻的配比要求，滿足玻璃幕墻或中空玻璃膠的比例要求。

650

【技術參數】

設備型號                             BST03

混合比                                6:1~14:1      

基料桶                                55加侖(200L)    

固化劑桶                             5加侖(20L) 

最大耗氣量                           0.8m3/min   

擠膠最大壓力                         20Mpa  

供氣壓力                              0.5~0.8Mpa

出膠量                                4~10L/min

外型尺寸                             1100×950×2500mm

The BST03 high-efficiency adhesive dispensing machine, whose key parts are supplied by international leading brand, has a good quality and reliability. The key functional parts are made of high-tension and quality stainless steel with thermal treatment, the reliability and durability of the machine are greatly improved, ensuring a fairly well quality of machine.

The material pump, curing agent pump and proportional pump high pressure valve of the machine are made of special leakage-free alloy by grinding. The proportional pump is installed with an adjustable proportioning mechanism; the nearly fastidious proportioning requirements of the bicomponent adhesive are fulfilled, as well as those of curtain wall glass and insulating glass.

The key parts can assemble with GRACO with good quality and reliability depends on customer requirement.

Technical Parameter

Model                                BST03

Mix ratio                              6:1~14:1      

xCharging basket                         55加侖(200L)    

Curing agent basket                     5加侖(20L) 

Beat rubber quantit                      0.8m3/min   

Squeeze pressure                        20Mpa  

Air pressure                              0.5~0.8Mpa

Output                                4~10L/min

Overall dimension                      1100×950×2500mm