福州杰因特塑料焊接設備有限公司
主營:土工膜焊接機+防水板焊接機+防滲膜焊接機+爬焊機+氣壓監測器+擠出式焊槍+熱風焊槍
主營:土工膜焊接機+防水板焊接機+防滲膜焊接機+爬焊機+氣壓監測器+擠出式焊槍+熱風焊槍
品牌: | 型號: |
Jointer系列土工膜焊接機是福州杰因特塑料焊接設備有限公司與科研院所聯合研制的新一代土工膜自動爬行焊接產品,滿足了土工膜在現代社會各個工程領域不斷拓展的應用需求。該機器采用了先進的熱楔式結構,可以面向各種不同材質特性和不同規格厚度的土工膜產品進行焊接,適用于HDPE、LDPE、PVC、EVA、PP等一切可熱熔性材料的焊接。該系列焊機溫度控制部分采用自動恒溫PID控制,控制精度高,溫度波動小,速度控制部分采用脈寬調制(PWM)自動穩壓穩速電路,直流伺服電機驅動,輸出力矩大,行走平穩,能在爬坡,垂直爬行及路面負載發生變化時保持速度恒定。該系列焊接機工作性能穩定、操作方便、焊接效率高、可靠性強,廣泛應用于高速公路、鐵路、隧道、水庫水渠、污水池、垃圾填埋、建筑防水等工程。
JIT800型技術參數:
輸入電壓V:220V 頻率:50Hz
功率P:750W
焊接速度V:0.5-5m/min
加熱溫度T:0-450℃
焊接材料厚度:0.2mm-1.5mm
焊接寬度:12.5mm2條,中間空腔12mm
搭接寬度:10cm
焊縫強度:≥85%母材(剪切方向抗拉)
整機重量:5Kg
絕緣等級:II類
The control of this series of welding machine adopts PID automatic thermostatic control with high control accuracy and low temperature fluctuation; speed control adopts PWM automatic voltage and speed regulation circuit, driven by DC servo motor, with great output torque and the operating is stable. It can maintain a constant speed on the condition of creeping, vertical creeping and variable road load. Also this series of welding machine is stable in performance despite of external temperature and voltage variation.
Jointer series geomembrane welding machine is our new developed products, which can weld geomembrane of various thickness and are applicable for welding of all thermal-fused material such as LDPE, PVC, HDPE, EVA, PP and the like.
This series of welding machine is excellent in performance and easy for operating, with high welding speed and good work quality. It is extensively used in engineering projects such as expressways, tunnels, reservoirs, waterproof of construction and so on
Voltage (V): 220V
Frequency (Hz): 50Hz
Power (P): 750W
Welding speed (V): 0.5-5m/min
Heating temperature (T): 0-450℃
Thickness of material to be welded: 0.2mm-1.5mm
Overlap width: 100mm
Welding width: 12.5mm×2, interior cavity 12mm
Seam strength: ≥85% base material (tensile resistant in shear direction), complete machine
Weight: 5Kg
Insulation class: class II