一.DY-100保險箱指紋鎖（電磁鐵型）概述

     指紋鎖現在作為一項成熟的技術， 已經成為第三代安全產品，打破了傳統意義上的機械鎖和密碼鎖開門的功能。它以安全（世界上沒有兩枚相同的指紋）、便捷（一按即開）優勢很快得到消費的認可。

二.DY-100采用最新感應技術,無須再按開關上電。放上手指即可開門

三.DY-100保險箱指紋鎖（電磁鐵型）規格參數

1、系統無用戶時，首次添加用戶：

按啟動鍵后再按添加鍵進入用戶添加模式，添加方式為同一枚手指連續在指紋采集窗口輕按3次，當聽見滴滴二聲短響、藍燈閃亮，表示一個用戶添加成功，還可以繼續添加，如無需再添加指紋可按啟動鍵結束添加模式；如聽見滴、滴二聲長響、紅燈閃亮，表示添加不成功，請重新上述操作。

系統默認前3位用戶為管理員，其它為普通用戶

注：管理員主要是為了確保添加新用戶時，其所添加的指紋是經過管理員確認許可的。

2、系統有用戶時，再次添加用戶：

按啟動鍵后再按添加鍵進入用戶添加模式，紅藍燈均亮并閃，這時候需要管理員指紋來確認，聽見滴滴二聲短響、藍燈閃亮，表示確認通過，則可以繼續添加新指紋，添加指紋方法與第一節相同；聽見滴、滴二聲長響、紅燈閃亮，表示管理員指紋確認未通過，請重新按管理員指紋，重新上述操作。

² 刪除用戶操作方法

按啟動鍵后再按刪除鍵，系統提示滴、滴、滴三聲長響后滴滴，表示刪除成功。

² 開門操作方法

按啟動鍵，激活系統，此時狀態燈藍燈閃、指紋采集儀燈亮，按下手指，聲音提示滴滴、指示燈藍燈亮1秒。指紋驗證通過，所有燈熄滅，電機轉動、用戶轉動把手就可開門（某些型號是自動開門）。如果聲音提示滴、滴、滴、指示燈紅燈亮1秒，表示指紋驗證失敗，可以繼續進行開門操作。連續五次指紋驗證失敗，需重新按啟動鍵。

² 自鎖功能

用戶指紋通過后，如沒有開啟保險箱，保險箱再5秒鐘后會重新自動上鎖。

² 關門操作方法

將門推動至關閉（閉合狀態）、逆時針轉動把手即可關門。（部份產品門推動至關閉后自動關門）。

How to add user
1, when the system has no users, add administrator users for the first time:
Press Start button and then press the Add key to enter user to add mode, which means the same one finger fingerprint collection window at the touch of a row 3 times, when the hear the didi Two short beeps and flashing blue light, indicating a user added successfully, you can continue to add, such as the need to add fingerprint patterns can add a start button end; such as hear, di, di two-ring sound, flashing red light Liang,mean adding is not successful, the operation again.
The first 3th is administrator user , the other is the average user
Note: the administrator is to ensure that when you add new users, it added the fingerprint is recognized by the administrator permission.
2, when the system have administrator users, add average user : Press Start button and then press the Add key to enter user to add mode, and flash red and blue lights are lit, this time the need to administrator fingerprint to confirm, I heard di, di, two short beeps, blue lights flashing, that confirmed, you can continue to add new fingerprints, the fingerprint method and add the same section I;Hear the di, di two-ring sound, flashing red light, mean administrators did not pass the fingerprint recognition, re-press the Manager fingerprint, re the above operation.
²How to delete user
press start button and then press the delete key, the system prompts di, di, di After three long ring bit, said deleted successfully.
 How to open door
press  start button to activate the system, then the status light flashes blue lights, Fingerprint scanner lights, press the finger, voice prompt  di , light blue lights on for 1 second. By fingerprint verification, all the lights off, the motor rotation, the user can turn the handle to open the door (some models are automatically open the door.)
If the voice prompt  di, di, di, light red light 1 second, that the fingerprint authentication fails, you can continue to open operation. Five consecutive fingerprint authentication fails, the need to re-start button, press start.
self-locking
after the passage of the user fingerprints, if not²open the safe, safe again after 5 seconds and then automatically locked.
 How to close door
 push the door closed turn the handle counterclockwise to close. (Some products to promote to the closed door automatically closed.)