Z通用同步手動組角機

一、產品簡介： 

這款組角機是從最早期首創的夾掌結構動力傳動基礎上進一步改進而來的，它解決了之前產品撞刀運行軌跡不是直線的缺點，而且各傳動節點均采用絞鏈連接，減少了機構的間隙，所采用的動力原理更省力輕巧，是機械組角機最佳的傳動形式。

二、產品結構特點：                                                                                              

1．兩側撞刀安置于滑道中直線運動，使組角結構更合理。

2．動力傳動采用夾角支絞機構，使施加的外力更輕。

3．撞刀長度可以調整，使組角范圍可根據材料大小而進行調整。

三、主要技術參數：

▲撞角范圍：38～70系列

▲撞角高度：70mm

▲整機重量：125kg

電話：0757-81185270  13719299479  聯系人：曾碧梅   QQ：342582791

郵箱：beatrice-zbm@hotmail.com

Z general synchro manual angle machine

1. Product introduction:This machine is originated from the earlier clamps power transmission structure, it has solved the shortcoming of the hit path not straight line, moreover various transmissions node is linked by gemel, this reduced the gap amount different parts, this form is the best transmission form for mechanical angle machine because the power principle is more save labour and dexterous.

2. Product characteristic:

 1. Both sides hit are placed in the slideway and move in straight line, this makes the angle structure to be more reasonable.

 2. The power transmission was adopted the angle to twist organization, it causes the external force to be lighter.

2. It can be used in a broader material scope because of its adjustable length of the hit knife.

3. Major parameter:

▲The angle scope: 38~70 series

▲The angle altitude: 70mm

▲Weight: 125kg